![]() |
Need help with ASUSTek usb wifi - Printable Version +- Linux Lite Forums (https://www.linuxliteos.com/forums) +-- Forum: Hardware - Support (https://www.linuxliteos.com/forums/forumdisplay.php?fid=6) +--- Forum: Network (https://www.linuxliteos.com/forums/forumdisplay.php?fid=24) +--- Thread: Need help with ASUSTek usb wifi (/showthread.php?tid=7416) |
Need help with ASUSTek usb wifi - ohjrson - 10-13-2020 Hey, I have an AsusTek usb wifi that does not seem to be turning on. I think it needs a driver. But I am not sure where to get it from. I have looked in the forum and have had no luck. The actual cd that comes with it says there is a driver for Linux but I don't know how to install it. Any help would be great thanks here is some info: inxi -N Network: Device-1: Intel 82567V-2 Gigabit Network driver: e1000e Device-2: BUFFALO (formerly Mel ) Nintendo Wi-Fi type: USB driver: rt2500usb Device-3: ASUSTek 802.11ac NIC type: USB driver: usb-network uname -a Linux -Aspire-X3812 5.4.0-49-generic #53-Ubuntu SMP Fri Sep 18 09:54:57 UTC 2020 x86_64 x86_64 x86_64 GNU/Linux sudo lsusb [sudo] password for xxxxxxxxxx Bus 002 Device 003: ID 058f:6363 Alcor Micro Corp. Mass Storage Device Bus 002 Device 009: ID 0b05:184c ASUSTek Computer, Inc. 802.11ac NIC Bus 002 Device 008: ID 0411:008b BUFFALO INC. (formerly MelCo., Inc.) Nintendo Wi-Fi Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 005 Device 003: ID 046d:c404 Logitech, Inc. TrackMan Wheel Bus 005 Device 002: ID 045e:0040 Microsoft Corp. Wheel Mouse Optical Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 002: ID 046d:092c Logitech, Inc. QuickCam Chat Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub xxxxxxxxxxx ~ sudo lspci 00:00.0 Host bridge: Intel Corporation 4 Series Chipset DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 4 Series Chipset Integrated Graphics Controller (rev 03) 00:19.0 Ethernet controller: Intel Corporation 82567V-2 Gigabit Network Connection 00:1a.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #4 00:1a.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #5 00:1a.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #6 00:1a.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #2 00:1b.0 Audio device: Intel Corporation 82801JI (ICH10 Family) HD Audio Controller 00:1c.0 PCI bridge: Intel Corporation 82801JI (ICH10 Family) PCI Express Root Port 1 00:1d.0 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #1 00:1d.1 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #2 00:1d.2 USB controller: Intel Corporation 82801JI (ICH10 Family) USB UHCI Controller #3 00:1d.7 USB controller: Intel Corporation 82801JI (ICH10 Family) USB2 EHCI Controller #1 00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev 90) 00:1f.0 ISA bridge: Intel Corporation 82801JIB (ICH10) LPC Interface Controller 00:1f.2 SATA controller: Intel Corporation 82801JI (ICH10 Family) SATA AHCI Controller 00:1f.3 SMBus: Intel Corporation 82801JI (ICH10 Family) SMBus Controller 01:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller rfkill list all 3: phy3: Wireless LAN Soft blocked: no Hard blocked: no ping -c5 8.8.8.8 PING 8.8.8.8 (8.8.8. 8) 56(84) bytes of data. 64 bytes from 8.8.8.8: icmp_seq=1 ttl=117 time=101 ms 64 bytes from 8.8.8.8: icmp_seq=2 ttl=117 time=447 ms 64 bytes from 8.8.8.8: icmp_seq=3 ttl=117 time=857 ms 64 bytes from 8.8.8.8: icmp_seq=4 ttl=117 time=126 ms --- 8.8.8.8 ping statistics --- 5 packets transmitted, 4 received, 20% packet loss, time 4001ms rtt min/avg/max/mdev = 101.037/382.879/857.048/305.917 ms Yes I do have 2 usb wifi adapters plugged in. Trying to get the ASUS to operate update: Tried opening install.sh from CD but says it cannot open. Even tried as sudo still not opening. Help Re: Need help with ASUSTek usb wifi - firenice03 - 10-21-2020 [member=54]ohjrson[/member] Thought I replied.... Try the additional software / drivers see if a specific exists... May need to supply the model# of the ASUS adapter for further assistance.... Re: Need help with ASUSTek usb wifi - ohjrson - 10-21-2020 It's an Asus AC1200 USB AC53 Nano Model# USB-AC53 Nano It came with a cd and when I looked at the cd contents it has a folder for Linux, but for PC linux... I think. I did look up a driver for an AC1200 Seagate and tried that https://ubuntuforums.org/showthread.php?t=2394372&page=3 And went through everything there but it stil does not work. CAUTION: when I did these thing outlined in the link some unusual things happened. So I don't know if you should click on them. I have a copy of the terminal output but it is rather large and I can't seem to load it up here. Let me know what you think. Thanks. Re: Need help with ASUSTek usb wifi - firenice03 - 11-03-2020 [member=54]ohjrson[/member] I find very similar... https://waynekhan.github.io/2020/05/30/asus-usb-ac53-nano-ubuntu.html or https://ubuntuforums.org/showthread.php?t=2395729 Perhaps some help??? It maybe worth looking a new Wifi - I believe Panda have had success... Also, it may worth looking at the Hardware databased - to see how many systems have the referenced hardware... - for the AC1200, there was 1.... Re: Need help with ASUSTek usb wifi - ohjrson - 11-04-2020 Thanks Firenice03 I have looked at the links and they look promising. I will try them out soon as I can and get back to you. Thanks for the assist. Cheers!! UPDATE Nov 16 2020: Hey Guys!! I did what the instructions said to do on the first link exactly as it was shown, basically copied and pasted and it is now working beautifully. THANK YOU FIRENICE03!!!! |