Black screen after sleep. Asus EEE1025

[firenice03]

Try

Code:

sudo update-grub

Remember to use the quotes " "
Just add parameters without the command
Should work with all pm-utils

Code:

ADD_PARAMETERS="--quirk-vbe-post --quirk-vbemode-restore"

Code:

dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend

This is another way, very usefull because it doesn't need sudo.

Thought I'd update.....
This issue is weird  I've tried a few quirks individually... Some "seem" to work but only once...
The

Code:

dbus-send --system --print-reply --dest="org.freedesktop.UPower" /org/freedesktop/UPower org.freedesktop.UPower.Suspend

only suspends the system - which the system doesn't seem to have to a problem waking from - only a lid closed hibernate.

I can add a quirk/update grub - close lid the system hibernates no problems - after a few I'll press power to wake, I get GRUB, it "thinks" feather bar, shows a tty screen for a second then the log on prompt. - which.. The big IF..
If I get the "this session is locked - redirecting" screen pop up, which then comes back to same log on = it will work..
If it stays on the log on screen and I log on - goes black, needs to be rebooted.
- thus far it seems to work the 1st time after a reboot, after a 2nd hibernate goes black.

I've disabled light locker was able to wake and go thru "waking" and directly to desktop (no log on prompt)

I'm still testing  8)..

FWIW: Intel Mobile 945GSE Express Integrated Graphics Controller
I'll keep updated - not sure but since I'm not running "Asus EEE1025" I can move to a new thread..??...

@hb Was your issue with a flickering screen? Mines not doing this, other than waking from hibernate screen working normally.
- but may look into a bit..