Black Screen after hibernate - Intel Graphics

[firenice03]

So if I use the screenshot settings you have above, I can close the lid, and it'll hibernate and wake up from hibernation without any additional commands, but if I want to manually hibernate it, I'll need to enter at least one of the commands you have listed?

As tested on my hardware.. Yes, disabling Light Locker corrected the wake from hibernate when closing lid... I removed any other additional settings/quirks.
If you have a hibernate button and configure within Power Manager - I assume this should work as well...
For me closing the lid is the easiest way to force a hibernate.

You could allow it to go to hibernate after an X amount of time. I have this configured on my 2nd PC (SIS graphics) and it works fine (Light Lock is disabled on this system too) thou its a desktop - no lid to close, and do not recall any issues as I only suspended it before.

Light Locker displays a log on screen (along with other options) but with default settings the log on - by disabling you will loose its lock (although fixing the waking from hibernation). If you need a lock, the other 2 applications have a lock prompt as well - it just looks different.

You should only have to set 2 options
Power Manager: Hibernate when lid is closed
Light Locker: Set "Enable Light-locker" under "Locking" to OFF

The others options are screensaver and other customization's based on duration. Feel free to mimic.

Since these are simple GUI changes - I'd say doesn't hurt to try, worst case it doesn't correct and you have to hard boot.

Curious if it does correct and what hardware you're running  ;D