01-22-2016, 05:50 PM
You need to make sure the dvd/usb gets booted in UEFI/EFI mode first, otherwise UEFI install will fail.
Boot the dvd/usb, open a terminal and run this command:
If you see "efi" listed in the output, then you're booted in UEFI mode and can go ahead with install attempt. If not, then you need to reboot and look for an option that boots the dvd/usb in UEFI mode.
Boot the dvd/usb, open a terminal and run this command:
Code:
ls /sys/firmware
If you see "efi" listed in the output, then you're booted in UEFI mode and can go ahead with install attempt. If not, then you need to reboot and look for an option that boots the dvd/usb in UEFI mode.
Try Linux Beginner Search Engine for answers to Linux questions.