LINUX LITE 7.4 RC1 RELEASED - SEE RELEASE ANNOUNCEMENTS SECTION FOR DETAILS


Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
(Resuelto) Problemas de visualización de Linux Lite Wellcome
#1
Al abrir Lite Wellcome la ventana se queda en blanco y no visualizada nada!
No sé hay que reinstalar del el emulador de la terminal con
sudo apt install --reinstall lite-welcome
para arreglar el problema.

Es un problema que atañe a las actualizaciones

sudo apt install --reinstall lite-welcome No soluciona el pronlema
Reply
#2
Doesn't do it on the Live image. Will see if it does it after an install and updates.
Reply
#3
No problem after full updates. What else have you installed?
Reply
#4
Sounds similar to this topic. This is on an a 15 year old MAC.
https://www.linuxliteos.com/forums/insta.../#msg62255
stevef
clueless
Reply
#5
Al reinstalar con sudo apt install --reinstall lite-wellcome
sudo apt install --reinstall lite-welcome
Leyendo lista de paquetes... Hecho
Creando árbol de dependencias... Hecho
Leyendo la información de estado... Hecho
0 actualizados, 0 nuevos se instalarán, 1 reinstalados, 0 para eliminar y 0 no actualizados.
Se necesita descargar 620 kB de archivos.
Se utilizarán 0 B de espacio de disco adicional después de esta operación.
Des:1 http://repo.linuxliteos.com/linuxlite fluorite/main amd64 lite-welcome all 6.0-0040-linuxlite [620 kB]
Descargados 620 kB en 2s (402 kB/s) 
(Leyendo la base de datos ... 894767 ficheros o directorios instalados actualmen
te.)
Preparando para desempaquetar .../lite-welcome_6.0-0040-linuxlite_all.deb ...
Desempaquetando lite-welcome (6.0-0040-linuxlite) sobre (6.0-0040-linuxlite) ...
Configurando lite-welcome (6.0-0040-linuxlite) ...
Procesando disparadores para gnome-menus (3.36.0-1ubuntu3) ...
Procesando disparadores para mailcap (3.70+nmu1ubuntu1) ...
Procesando disparadores para desktop-file-utils (0.26-1ubuntu3) ...

Lo reinstaló correctamente, pero sigue con el error de no poder visualizar el contenido de la ventana de Lite Wellcome
y a veces se bloque el PC porque se ve que las actualizaciones han dejado de momento, inservible la aplicación lite-welcome.
Reply
#6
No sé si el problema que tengo tiene que ver con haber instalado en linux lite 6.6:
gtkam con aclamav para linux, libreoffice en español versión Still, Scribus, KolourPaint, Okular, OnlyOffice, Edge, Firefox, Chrome, Kazam, K3b, Breeze, , Dolphin, Lincity, Peazip y Dosbox-X
Lo cierto es que ese mismo problema lo tengo en mi laptop Yo suelo actualizar el sistema operativo desde la terminal de comandos de linux:

echo && echo Actualización completa del sistema ... && echo && echo Teclea clave de superusuario y pulsa intro... && echo  && sudo apt update -y && sudo apt upgrade -y && sudo apt full-upgrade &&  sudo apt dist-upgrade && echo  && echo Actualizando el grub del sistema ...  && echo &&sudo apt dist-upgrade && sudo update-grub && sudo update-grub2 && echo && echo Eliminando paquetes obsoletos... && echo && sudo apt autoremove -y && sudo apt autoclean && echo &&  echo Actualizando flatpak ... && echo && sudo flatpak update -y && echo && echo Actualizando snap... && echo && sudo snap refresh

y no suelo usar ni linux lite update, ni linux lite lite-welcome, todo lo hago desde la consola, ya que puede hacer lo mismo consumiendo menos recursos. Pero me gustaría contribuir en todo momento comunicando cualquier error para la mejora de linux lite.
Reply
#7
i had same issue
Reply
#8
Apologies for replying in English.

Unable to reproduce this problem at the moment so looking for what may be different on your systems.
I may have missed some details in earlier posts due to translation.

To any user seeing the black window instead of the Lite Welcome screen can you provide more information ?

1) Confirm the version of Linux Lite you are using.
2) Did the problem appear on the very first boot after Linux Lite was installed ?
3) If the problem appeared after using the system for a while can you associate the start of the problem with a particular event such as installing specific software, an update or a specific desktop customisation ?
4) Do other Lite applications such as Lite Sounds, Lite Sources, Lite Tweaks etc appear ok ?
5) Are there any other (non Lite) applications behaving unexpectedly.
6) If you start Lite Welcome from the command line what messages are generated ?
  There are likely to be some "xapp-gtk3-module" messages and possibly a DeprecationWarning, but any additional message may help diagnose.
7) The output of these commands
Code:
inxi -Fxxx
Code:
inxi -r
stevef
clueless
Reply
#9
Hello, Good Afternoon, Steven!
I wrote lite-welcome and press return key in the emulate terminal of linux linux, and the result is the following:
francisco  ~  lite-welcome
Using /usr/share/litewelcome/path.
/usr/bin/lite-welcome-installed:105: DeprecationWarning: WebKit2.WebView.run_javascript is deprecated
  self.run_javascript("$('#arch').html('{}')".format(self._config._arch))

after, I wrote  inxi-Fxxx and the result is the following:
francisco  ~  inxi -Fxxx and the result is the following:
System:
  Host: francisco-HP-Compaq-dx2420-Microtower
  Kernel: 5.15.0-112-generic x86_64 bits: 64 compiler: N/A
  Desktop: Xfce 4.16.0 tk: Gtk 3.24.23 info: xfce4-panel wm: xfwm4
  dm: LightDM 1.30.0 Distro: Linux Lite 6.6 LTS
  base: Ubuntu 22.04.4 LTS (Jammy Jellyfish)
Machine:
  Type: Desktop System: Hewlett-Packard product: HP Compaq dx2420 Microtower
  v: N/A serial: <superuser/root required> Chassis: type: 3
  serial: <superuser/root required>
  Mobo: MSI model: 2A78h v: 1.0 serial: <superuser/root required>
  BIOS: Phoenix v: 5.18 date: 02/20/2009
CPU:
  Topology: Dual Core model: Intel Core2 Duo E7400 bits: 64 type: MCP
  arch: Penryn rev: A L2 cache: 3072 KiB
  flags: lm nx pae sse sse2 sse3 sse4_1 ssse3 bogomips: 11200
  Speed: 2800 MHz min/max: 1600/2800 MHz Core speeds (MHz): 1: 2243 2: 2205
Graphics:
  Device-1: NVIDIA GT218 [GeForce 210] driver: nouveau v: kernel
  bus ID: 01:00.0 chip ID: 10de:0a65
  Display: x11 server: X.Org 1.21.1.4 driver: modesetting
  unloaded: fbdev,vesa resolution: 1366x768~60Hz
  OpenGL: renderer: NVA8 v: 3.3 Mesa 23.2.1-1ubuntu3.1~22.04.2
  direct render: Yes
Audio:
  Device-1: Intel NM10/ICH7 Family High Definition Audio
  vendor: Hewlett-Packard driver: snd_hda_intel v: kernel bus ID: 00:1b.0
  chip ID: 8086:27d8
  Device-2: NVIDIA High Definition Audio driver: snd_hda_intel v: kernel
  bus ID: 01:00.1 chip ID: 10de:0be3
  Device-3: Generalplus CAMERA - UVC type: USB
  driver: snd-usb-audio,uvcvideo bus ID: 1-3.2:8 chip ID: 1b3f:2247
  Sound Server: ALSA v: k5.15.0-112-generic
Network:
  Device-1: Realtek RTL810xE PCI Express Fast Ethernet
  vendor: Hewlett-Packard driver: r8169 v: kernel port: de00 bus ID: 02:00.0
  chip ID: 10ec:8136
  IF: enp2s0 state: down mac: 40:61:86:0e:ac:87
  Device-2: TP-Link TL-WN822N Version 4 RTL8192EU type: USB driver: rtl8xxxu
  bus ID: 1-1:2 chip ID: 2357:0108
  IF: wlx503eaa402fb5 state: up mac: 50:3e:aa:40:2f:b5
Drives:
  Local Storage: total: 465.77 GiB used: 112.17 GiB (24.1%)
  ID-1: /dev/sda vendor: Seagate model: ST3250310AS size: 232.89 GiB
  speed: <unknown> serial: 6RYC0G87 rev: C temp: 34 C scheme: MBR
  ID-2: /dev/sdb vendor: Western Digital model: WD2500AAKX-603CA0
  size: 232.89 GiB speed: <unknown> rotation: 7200 rpm
  serial: WD-WMAYW2818487 rev: 1H18 scheme: MBR
Partition:
  ID-1: / size: 211.62 GiB used: 112.17 GiB (53.0%) fs: ext4 dev: /dev/sdb5
Sensors:
  System Temperatures: cpu: 39.0 C mobo: N/A gpu: nouveau temp: 53 C
  Fan Speeds (RPM): N/A
Info:
  Processes: 221 Uptime: 18m Memory: 3.82 GiB used: 2.11 GiB (55.3%)
  Init: systemd v: 249 runlevel: 5 Compilers: gcc: 11.4.0 alt: 11/12/9
  Shell: bash v: 5.1.16 running in: xfce4-terminal inxi: 3.0.38

And finally I wrote and the result is the following:
francisco  ~  inxi -r
Repos:
  Active apt repos in: /etc/apt/sources.list
  1: deb http://es.archive.ubuntu.com/ubuntu/ jammy main restricted
  2: deb http://es.archive.ubuntu.com/ubuntu/ jammy-updates main restricted
  3: deb http://es.archive.ubuntu.com/ubuntu/ jammy universe
  4: deb http://es.archive.ubuntu.com/ubuntu/ jammy-updates universe
  5: deb http://es.archive.ubuntu.com/ubuntu/ jammy multiverse
  6: deb http://es.archive.ubuntu.com/ubuntu/ jammy-updates multiverse
  7: deb http://es.archive.ubuntu.com/ubuntu/ jammy-backports main restricted universe multiverse
  8: deb http://archive.canonical.com/ubuntu jammy partner
  9: deb http://es.archive.ubuntu.com/ubuntu/ jammy-security main restricted
  10: deb http://es.archive.ubuntu.com/ubuntu/ jammy-security universe
  11: deb http://es.archive.ubuntu.com/ubuntu/ jammy-security multiverse
  No active apt repos in: /etc/apt/sources.list.d/flatpak-ubuntu-stable-jammy.list
  No active apt repos in: /etc/apt/sources.list.d/geogebra.list
  Active apt repos in: /etc/apt/sources.list.d/google-chrome.list
  1: deb [arch=amd64] https://dl.google.com/linux/chrome/deb/ stable main
  Active apt repos in: /etc/apt/sources.list.d/libreoffice-ubuntu-libreoffice-still-jammy.list
  1: deb https://ppa.launchpadcontent.net/libreof...ll/ubuntu/ jammy main
  No active apt repos in: /etc/apt/sources.list.d/libreoffice-ubuntu-ppa-jammy.list
  Active apt repos in: /etc/apt/sources.list.d/linuxlite.list
  1: deb http://repo.linuxliteos.com/linuxlite/ fluorite main
  Active apt repos in: /etc/apt/sources.list.d/linuxuprising-ubuntu-apps-jammy.list
  1: deb https://ppa.launchpadcontent.net/linuxup...ps/ubuntu/ jammy main
  Active apt repos in: /etc/apt/sources.list.d/microsoft-edge.list
  1: deb [arch=amd64] https://packages.microsoft.com/repos/edge/ stable main
  Active apt repos in: /etc/apt/sources.list.d/scorpio-ubuntu-qelectrotech-dev-jammy.list
  1: deb https://ppa.launchpadcontent.net/scorpio...ev/ubuntu/ jammy main
  Active apt repos in: /etc/apt/sources.list.d/ubuntu-cis.list
  1: deb https://esm.ubuntu.com/cis/ubuntu jammy main
  Active apt repos in: /etc/apt/sources.list.d/ubuntu-esm-apps.list
  1: deb https://esm.ubuntu.com/apps/ubuntu jammy-apps-security main
  2: deb https://esm.ubuntu.com/apps/ubuntu jammy-apps-updates main
  Active apt repos in: /etc/apt/sources.list.d/ubuntu-esm-infra.list
  1: deb https://esm.ubuntu.com/infra/ubuntu jammy-infra-security main
  2: deb https://esm.ubuntu.com/infra/ubuntu jammy-infra-updates main
  Active apt repos in: /etc/apt/sources.list.d/winehq-jammy.sources
  1: deb [arch=amd64 i386] https://dl.winehq.org/wine-builds/ubuntu jammy main

Stevef, I hope the information I provide is useful to you. Anything I can do would be greatly appreciated, I am very interested in this problem being fixed, I am encouraging my contacts to move from Windows 10 to Linux Lite, and it is very important for new users in Linux, the app: linux lite Welcome. sincerely!

Reply
#10
Thank you for the information.

The answers to these questions still needed to help understand.

1) Did the problem appear on the very first boot after Linux Lite was installed ?
2) If the problem appeared after using the system for a while can you associate the start of the problem with a particular event such as installing specific software, an update or a specific desktop customisation ?
3) Do other Lite applications such as Lite Sounds, Lite Sources, Lite Tweaks etc appear ok ?
4) Are there any other (non Lite) applications behaving unexpectedly.
stevef
clueless
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)